The 2/2-way solenoid valves are electrically operated with two port connections and two switching positions. These valves are hermetically sealed on the outside and have been designed for liquid, gaseous, dirty, or poisonous (toxic) media. Even if the seals are completely worn out, no process media can escape - the valves maintain their seal.
The valves can be optionally equipped with features such as manual override, various limit switches, mounting brackets, and a variety of electrical plug connections including M12x1 DESINA/VDMA and special PWM plugs that require lower current.
The direct-operated valves are available with nominal orifice sizes of approx. 0.375" to 3". The media pressure range extends from vacuum to 1500 psi. The sealing of the valve seat is guaranteed in the preferred direction up to full pressure rating in accordance with DIN 12266. In the opposite direction, sealing for most valves allows 240 psi maximum. Technical details can be found in the respective data sheets. The flow factor (Cv value) ranges from 2.9 to 80.9 GPM. Depending on the nominal size, the valves are available with port connections that are threaded, flanged or with special designs. This series is available with ATEX Zone 2/Category 3 rating.
Valves are designed according to medium and application requirements. Resulting specifications may deviate from the general specifications published on the data sheet regarding the design, sealing materials and characteristics.
| co-ax type | orifice inch approx. |
connection | max. pressure range | Cv value |
|---|---|---|---|---|
MK 10 |
0.375" | threaded | 0-600 psi | 2.9 GPM |
MK 10 63/100 bar |
0.375" | threaded | 0-960 psi 0-1500 psi |
2.6 GPM 1.8 GPM |
MK / FK 15 |
0.50" |
threaded flanged |
0-960 psi 0-1500 psi |
2.7 GPM 1.9 GPM |
MK / FK 20 |
0.75" |
threaded flanged |
0-1500 psi | 9.7 GPM |
MK / FK 25 |
1.00" |
threaded flanged |
0-1500 psi | 15 GPM |
MK / FK 32 |
1.25" |
threaded flanged |
0-1500 psi | 20.1 GPM |
MK / FK 40 |
1.50" |
threaded flanged |
0-960 psi | 25.2 GPM |
MK / FK 50 |
2.00" |
threaded flanged |
0-240 psi | 43.9 GPM |
FK 65 |
2.50" | flanged | 0-240 psi | 71.7 GPM |
FK 80 |
3.00" | flanged | 0-240 psi | 106.4 GPM |
